VTL Logo PRE LOVED

TL7.5 Series III Reference Preamplifier

SOLD

VTL 7.5 Pre-amplifier Series 3 in Black

Current specification and just 2 years old – in exceptional condition. There is not a lot you can say that hasn’t been said about this pre-amp, fast, articulate with great dynamics while still possessing an excellent tonal balance for a truly engaging sound. With VTL’s renowned reliability and constructional prowess we are happy to support this used unit (if purchased and used within the UK) with a 2-year warranty, making for a veritable bargain.

There is no original box or packing for this unit (as reflected in the price) however we will ensure commensurate packing when purchased.

New Price: £33,000

Used Price: £16,000

VTL Logo PRE LOVED

TL7.5 Series III Reference Preamplifier

SOLD

VTL 7.5 Pre-amplifier Series 3 in Black

Current specification and just 2 years old – in exceptional condition. There is not a lot you can say that hasn’t been said about this pre-amp, fast, articulate with great dynamics while still possessing an excellent tonal balance for a truly engaging sound. With VTL’s renowned reliability and constructional prowess we are happy to support this used unit (if purchased and used within the UK) with a 2-year warranty, making for a veritable bargain.

There is no original box or packing for this unit (as reflected in the price) however we will ensure commensurate packing when purchased.

New Price: £33,000

Used Price: £16,000


FEATURES

The Series III builds on improvements made to the Series II for an even higher level of performance. The new design features an extensively revised power supply based on current-sourced shunt regulator technology that minimizes impact on the audio signal by eliminating high voltage gain. Far more precise power regulation yields dramatically improved rejection of noise and AC fluctuation.

The completely redesigned high current gain stage utilizes newly available FET technology developed for green technologies such as solar panels and electric cars that require a normally-on state. Unlike MOSFETs that need to be biased on, normally-on devices operate more like vacuum tubes in the audio output stage, with simpler circuits that continuously conduct current, resulting in a more tube-like sound. The high-current gain stage has been further optimized for linearity with zero global negative feedback in the circuit.

Also included in the upgrade are new specially selected audiophile grade capacitors and a fully bi-directional RS-232 control interface for increased compatibility with modern home theater systems.

Enhancements to the Series III result in an even higher level of coherence, integration and transparency of sound, with dramatically improved mid-bass and midrange, and a more tube-like sonic character.

  • Isolated Control Unit chassis with 12 separate fully regulated power supplies
  • Separate Audio Unit chassis with zero internal digital activity and isolated from AC and power supply noise

Audio unit features

  • Fully balanced differential circuit with balanced in and out, and mirror-image layout
  • Simple 2-stage circuit topology with differential gain stage and output buffers for musical purity and integrity
  • Ultra low impedance output stage to drive any length of cable and any power amplifier/paralleled amplifier/subwoofer load
  • 30 microfarad output capacitors for vastly improved bass control
  • Tube complement: 2 – 12AU7 tubes
  • Gain switching between normal gain and low gain with 6dB gain reduction
  • Single fully balanced differential 95-step 70dB discrete resistor relay attenuator for all attenuation functions, using low signal instrumentation ruthenium relays for greatest resolution
  • Microphonically damped tube gain stage for greater vibration noise elimination

Control power supply unit features

  • Ramped B+ filament soft-start power up for extended tube life
  • Huge energy storage power supply for elimination of AC fluctuation and noise rejection
  • Low noise processor control design for all functions

User interface features

  • Processor loop – any of 8 inputs can be assigned as fixed unity gain pass through
  • Tape monitor function for both tape loops
  • 4 separately programmable trigger outputs
  • Bi-directional RS-232 interface
  • Programmable input offsets
  • Selectable padded inputs
  • Rigid Combination steel and non-magnetic chassis and machined aluminum remote wand
  • Factory upgradeable from Series I and Series II

Reference Preamplifier Features

Audio unit features

  • New FET device output stage for more tube-like sound and simpler circuit
  • New device in the gain stage current source for improved musicality and better single-ended operation
  • Zero Global NFB for vastly improved faster dynamic and tonal resolution, and unconditionally stable circuit, without any phase shift.
  • All audiophile grade Mundorf capacitors in signal path with bypass system for improved HF resolution

Control power supply unit features

  • Vastly improved lower impact and greater precision-regulated current-sourced shunt power supply
  • Teflon power supply bypass caps for improved top end

SPECIFICATION

Vacuum Tube Complement2 x 12AU7
Inputs4 pairs balanced/XLR or RCA single-ended
4 pairs single-ended/RCA
Outputs2 pairs balanced out
2 pairs single-ended RCA out
2 pairs single-ended RCA buffered Tape Out
Remote Control FunctionsPower
Source Select
Volume up/down
Mute
Fade
Balance Control
Phase Reverse
GainBalanced in and Balanced out: 19.2 dB
Single-ended in and Balanced out: 19.2 dB
Balanced in and Single-ended out: 13.2 dB
Single-ended in and Single-ended out: 13.2 dB
Output Impedance25 Ohms (Max 150 ohms at 10Hz)
Input Impedance50K Ohms (20k ohms min)
Frequency response + 0 – 1 dB1 Hz – 100KHz (20Hz – 100kHz +0–1dB into 600 ohms with 900pf 20’ interconnect cable)
Maximum Output Voltage < 1% THD30V into 10K or above 10Hz – 200kHz +/- 1 dB
10V into 600 ohms
Channel Separation> 100 dB @ 1KHz (>80 dB @ 20kHz)
Power Consumption150 Watts
Dimensions (W x D x H)Control chassis
17.5 x 17.5 x 4 inches
44.5 x 44.5 x 10.2 cm
Audio chassis
17.5 x 17.5 x 6 inches
44.5 x 44.5 x 15.3 cm
Weight90 lbs (40.82 Kg) Fully packed in two boxes
Unpacked weight:
Audio Unit – 38 lbs (17.24 Kg)
Control Unit – 32 lbs (14.50 Kg)

Downloads

TL7.5 Series III Data Sheet

Our VTL partners