Vitus Audio Logo

MP-D201 Mk.III

MP-D201 Mk.III DAC
MP-D201 Mk.III DAC
MP-D201 Mk.III DAC

The MP-D201 Mk.III DAC is typically Vitus. It’s heavy, impeccably constructed inside and out and features a generous deployment of metals and alloys within its semi-industrial design.

The MP-D201 Mk.III is the supreme level of digital control centres. It has all the needed I/O’s to interface with basically anything digital. With the built-in masterclock and sample rate conversion, it reduces jitter to the lowest level possible. Combined with the four stereo DACs in the analogue stage – it gives the best possible sound achievable with today’s technology.

MP-D201 Mk.III DAC
Vitus Audio Logo

MP-D201 Mk.III

The MP-D201 Mk.III DAC is typically Vitus. It’s heavy, impeccably constructed inside and out and features a generous deployment of metals and alloys within its semi-industrial design.

The MP-D201 Mk.III is the supreme level of digital control centres. It has all the needed I/O’s to interface with basically anything digital. With the built-in masterclock and sample rate conversion, it reduces jitter to the lowest level possible. Combined with the four stereo DACs in the analogue stage – it gives the best possible sound achievable with today’s technology.


MP-D201 Mk.III DAC MP-D201 Mk.III DAC

There are the expected set of inputs on the rear panel allowing it to be connected to just about anything digital through a 24/192 USB or S/PDIF, both RCA or XLR. Everything that comes into the MP-D201 Mk.III is upsampled to 24bit/792kHz. Analogue outputs are via XLR or RCA.

Due to its modular design, there is the option of fitting a couple of pairs of analogue inputs (RCA and XLR) and a high-quality volume control allowing it to function as a DAC/preamplifier. The MP-D201 Mk.III has a standard on-board volume for level trimming, but the optional preamplifier in one box option is much better and uses a series of discrete resistors that don’t eat into resolution. This essentially means that you could forgo the expense of an undoubtedly expensive separate preamp and drive the power amplifier(s) directly from the DAC.

Specification

OutputXLR analogueRCA analogue
Available1 (L+R)1 (L+R)
Impedance80Ω80Ω
Frequency response+800kHz+800kHz
Signal to noise ratio>110dB @ 1kHz>110dB @ 1kHz
THD + noise<0.01%<0.01%
Digital technology
Master clock24.576 MHz +/- 1 ppm
Sample rate converterEngineered S8
DAC16x AD1955 – Mono and parallel configuration
Digital Audio InputsUSBAES/EBU & S/PDIF
Available1x USB B2x XLR & 2x RCA
Impedance75Ω/110Ω
Sample rate384kHz + DSD128192kHz
Resolution24bit24bit
Power Consumption
Standby<1W
Operation55W
Dimensions
Height135mm including feet
Width435mm
Depth428mm
Weight25kg
MaterialAluminium for body parts

Reviews

Downloads

MP-D201 Mk.III Information Sheet

Our Vitus Audio partners

Join the Airt Mailing List

Keep up to date with new product launches, exclusive deals and the latest news in the realm of high-end audio.

"*" indicates required fields

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Marketing Permissions*