Ferios
The Ferios monoblock is rated at 300W into 8 ohms, 580W into 4 ohms, and 780W into 2 ohms. The amplifier is essentially a scaled down version of Tidal’s Assoluta flagship amp, with the same circuit topology, build-quality, and casework, incorporating virtually all the same components as the flagship bar, a smaller power supply and output stage. Aesthetically a hand polished stainless-steel plate runs vertically through the center of the mirror finish black-acrylic front panel. Inputs are balanced only, and the two sets of output terminals are beautifully made from solid-silver.
TIDAL developed an all new 1.600 VA power supply with true power regulation specifically for the Ferios monaural amplifiers. The Ferios has limitless power reserves and outputs a lavish feed of clean current that will drive every speaker imaginable with ease. This generous supply of additional power is merely a welcome byproduct though. The real goal for TIDAL’s engineers was to produce an amplifier that sings with natural and effortless tonal qualities with no colouration. The TIDAL Ferios is quite simply a benchmark with regard to home audio amplification and a perfect partner for the Prisma line stage and Camira DMC.
Ferios
The Ferios monoblock is rated at 300W into 8 ohms, 580W into 4 ohms, and 780W into 2 ohms. The amplifier is essentially a scaled down version of Tidal’s Assoluta flagship amp, with the same circuit topology, build-quality, and casework, incorporating virtually all the same components as the flagship bar, a smaller power supply and output stage. Aesthetically a hand polished stainless-steel plate runs vertically through the center of the mirror finish black-acrylic front panel. Inputs are balanced only, and the two sets of output terminals are beautifully made from solid-silver.
TIDAL developed an all new 1.600 VA power supply with true power regulation specifically for the Ferios monaural amplifiers. The Ferios has limitless power reserves and outputs a lavish feed of clean current that will drive every speaker imaginable with ease. This generous supply of additional power is merely a welcome byproduct though. The real goal for TIDAL’s engineers was to produce an amplifier that sings with natural and effortless tonal qualities with no colouration. The TIDAL Ferios is quite simply a benchmark with regard to home audio amplification and a perfect partner for the Prisma line stage and Camira DMC.
Specification
- True mono reference power amplifier with linear power supply
- Pure silver hollow conductor EMI transformers
- Regulated active power supply with 2 x 800VA silent toroidal transformers, completely magnetically shielded and mechanical decoupled
- linear voltage power supply for ripple-free voltage and current stabilization for the two amplifier modules
- 410.000 µF stabilisation capacity, ultra fast response with high grade long life capacitors
- Solid aluminum parts and braces inside giving excellent torsional and longitudinal rigidity
- In-house made multilayer PCB (printed circuit board) with 105 µm copper per layer
- Hand selected transistors, measured and matched with a precision better than 1%
- DC-coupled input circuit, without coupling capacitors or relay in the signal path from the input to the output
- Ultra low impedance capacitors directly at the transistors for most shortest connection
- TIDAL proprietary APM system (amplifier protection management) is completely outside of the signal path
- TIDAL APM System is an isolated and completely autarkic system to manage and control the power amps safety: output current in relation to output-voltage, short circuit current, DC- offset, under-voltage and over-voltage
- Optional: fully autarchic working active crossover LPX-mono module for active amping to control the bass section of TIDAL reference speakers, perfectly matched in phase and frequency, different frequencies and level adjustable to trim bass response perfectly to each room and/or taste
- Intelligent soft start system, remote power on/off by TIDAL pre amplifiers via RJ45 ethernet cable
- Rated power output at 8 ohm: 1 x 300 watts continuous rms power
- Rated power output at 4 ohm: 1 x 580 watts continuous rms power
- Rated power output at 2 ohm: 1 x > 700 watts continuous rms power
- Bandwidth: 1Hz – 400 kHz (-3 dB), measured with impedance load
- Dimensions: W17.3″ x H12.4″ x D17,3″ / W44 cm x H31 cm x D40 cm
- Power consumption: < 1 W in stand-by mode
- Damping factor: ideal damping factor for life like music reproduction, perfectly even over the whole spectrum
- Weight: 49 Kg / 109 lbs. (packaging excluded)
Our Tidal Audio partners
Lotus HiFi
Walton on Thames, Surrey
+44 (0)788 785 2513
Join the Airt Mailing List
Keep up to date with new product launches, exclusive deals and the latest news in the realm of high-end audio.
"*" indicates required fields
